DKK

Good advice on lampshades


PLATED LAMP SCREENS IN SEVERAL SIZES 

The pleated lampshades fit both large and small lamp bases and are easy to adjust. The lampshade can also be mounted on a socket with a stand if you want to use it over the table as a ceiling lamp. 

 WHICH SIZE SHOULD I CHOOSE? 

We recommend a screen size of 24 cm for our small glass lamp feet of 28 cm and a screen size of 26 cm for our large lamp feet of 33 cm. Pendant / hanging lamps over the table are beautiful in the large sizes. The longer the target, the more the lamp fills. We recommend screens from size 27 cm and up. If you already have a lampshade on your lamp base, you can measure the length from top to bottom.

Mål din lampeskærm

TIP - HOW TO GET A LARGER TABLE LAMP 

Should your lamp stand in a prominent place and would you like it to fill up a little? If you choose the solution a lamp stand with support ring, you can extend the stand and choose one of our largest lampshades. That way you get a taller lamp with a big nice screen.

Få en større bordlampe

 

STAND FOR THE LAMP SHADE 

Remember that the lampshade is held in place with a lamp stand. If you do not already have a stand yourself, it can be ordered.

3 WAYS TO MOUNT YOUR LAMP SCREEN 

Depending on whether you use a lamp base, the lamp hangs from a cord in the ceiling above the table or mounts it on a standing floor lamp. See all our lampshade racks here 

LAMP SHADE STAND WITH CLAMP 

The absolute easiest method when you need to mount your lampshade and perfect for all kinds of table lamps and floor lamps. The lamp stand is clamped around the light bulb itself. It does not get simpler.

Lampeskærm stativ med klemme

LAMP SHADE STAND WITH CARRIER RING 

A lampshade stand with support ring is used when your table lamp or floor lamp has a shade holder stand mounted on the socket. Here you place the stand with support ring directly on top. If your lamp already has such a stand, it can easily be used or you can order a screen holder stand HERE. Lampshade stand with support ring  

LAMP SHADE STAND WITH SOCKET RING 

The lampshade stand with socket ring is screwed directly into the socket of your lamp. This solution is perfect for scissor lamps, pendant (hanging lamps) and floor lamps, where the lamp arm comes down from above the screen.

LAMP SHADE STAND WITH SOCKET RING

The lampshade stand with socket ring is screwed directly into the socket of your lamp. This solution is perfect for scissor lamps, pendant (hanging lamps) and floor lamps, where the lamp arm comes down from above the screen.

Lampeskærm stativ med bærering


CLEANING PLATED PAPER LAMP SHADES 
The lampshade can be brushed with a soft brush outdoors. ARE YOU STILL IN DOUBT ABOUT THE SIZE OF THE LAMP SCREEN or do you have other questions? You are always welcome to contact me via the form or at info@gronlykke.com. I strive to answer you as soon as possible.

 

 


English
English
DKK